The Cold-Start File: Auditing Heat-Pump Handover Before the First Winter
Photo: Harrz, CC BY-SA 4.0, via Wikimedia Commons
Why the handover file matters more than the EPC
A heat pump can be specified correctly and still perform poorly if it is commissioned as a box-ticking exercise. In new-build homes and retrofitted properties alike, the evidence of good setup sits in commissioning records, emitter balancing sheets, control settings and the first months of performance data. The Energy Performance Certificate will tell you a system exists and may indicate a modelled efficiency; it will not tell you whether the installer left the flow temperature high because the radiators were undersized, or whether the weather compensation curve was never adjusted after handover.
For buyers and renters, this is a practical due-diligence question rather than a technical hobby. A connected heat-pump system is a long-term service relationship: controls, sensors, remote monitoring and warranty terms all shape how the home behaves in January. The first winter is the real acceptance test. Reading the commissioning file before exchange or before signing a tenancy gives you a better chance of knowing whether the system has been prepared for it.
The documents to request
Start with the commissioning checklist and the handover pack. For a qualifying installation in the UK, you would normally expect references to MCS certification, the installer's notification and the relevant building-control or competent-person route. Ask for the specific documents rather than a general assurance that the system complies.
The useful items include:
- the heat-loss calculation and room-by-room emitter schedule;
- the commissioning record, including flow and return temperatures, pressure and any measured performance figures;
- radiator or underfloor-loop balancing records;
- domestic hot water cylinder settings and legionella treatment details;
- the weather compensation curve and any setback schedule;
- noise test or assessment information for the outdoor unit;
- warranty terms for the heat pump, cylinder, controls and any extended labour cover;
- service history, including the first service after commissioning.
Where the property has smart controls, ask for a read-only export of the settings and, if available, a summary of performance history. You do not need live access to the vendor's account; a dated export is enough to see whether the system has been monitored and adjusted.
Flow temperatures tell a story
Flow temperature is one of the clearest indicators of how a heat pump has been set up. A system designed for lower flow temperatures generally needs larger emitters or better fabric efficiency, but it can run more efficiently for longer periods. A system left at a high flow temperature may still heat the home, yet it can suggest that the design margins were tight or that commissioning was rushed.
The exact figures depend on the property, the outdoor design temperature and the emitter type, so there is no single number to demand. What matters is consistency: does the recorded design flow temperature match the installed emitters? Is there evidence that the system was balanced room by room? Has the installer recorded the actual measured temperatures at commissioning rather than only the intended settings?
Also look at domestic hot water. A cylinder that is set very high, or a reheat cycle that runs at inconvenient times, can increase running costs and reduce the benefit of a well-designed heating system. The commissioning file should show the intended cylinder temperature, reheat schedule and any immersion backup arrangements.
What smart-control history can reveal
Connected controls are useful because they leave a trace. A short performance history can show whether the heat pump has been cycling excessively, whether the home has struggled to reach its setpoint, or whether the installer adjusted the weather curve after the first cold snap. Some systems record estimated COP or seasonal performance; treat these figures as indicative rather than definitive, especially when they cover a short period or rely on manufacturer algorithms.
The more valuable evidence is often mundane: the dates of setting changes, the rooms with the greatest temperature variance, and whether any alerts were raised and resolved. If the vendor cannot produce a history, ask why. A recently commissioned system may simply not have one yet. An older connected system with no export may have been run without monitoring, which is not necessarily a defect but is a reason to ask more questions.
Noise, siting and the winter reality
Outdoor-unit noise is easy to overlook in summer viewings. Ask for the noise assessment and check the siting against the manufacturer's guidance and any planning conditions. In a managed block or a dense terrace, a unit that seems acceptable on a mild afternoon may be more noticeable in cold weather when it works harder. The commissioning file should record the selected mode and any noise-reduction settings, not just the declared sound power level.
Warranties and service obligations
Heat-pump warranties often depend on commissioning by an approved installer, annual servicing and sometimes registration within a set period. Read the terms before exchange. A remaining warranty is only valuable if it is transferable and if the service history supports it. For renters, ask who is responsible for servicing and whether the landlord's cover includes the controls and remote monitoring, not only the plant itself.
A short audit routine
Before you commit, request the handover pack and read it as a narrative: design, installation, commissioning, monitoring and service. Compare the recorded flow temperatures with the emitter schedule. Check that the cylinder and controls were set deliberately. Ask for the first service record and the warranty transfer terms. If the property is still under developer or installer warranty, put your questions in writing and keep the answers with the file.
The first winter will still teach you things no document can. But a heat-pump handover file that has been read, questioned and dated is a more reliable guide than a brochure claim. In a connected home, the paper trail is part of the heating system.